Merchandise Description

Item Description

Dry Long lasting Magnetic Head Pulley for Conveyor Belt

 

 

 

Introduction:

This product is a new kind of efficient and energy-preserving mineral separator. Aside from the current designs, we may layout and manufacture diverse magnetic depth separators for different belt specs as the buyers requirements. The merchandise are extensively employed in metallurgy and other fields and fulfill huge, medium and small mines. The products can be utilized in different processing sections of separating right after mineral pulverization and reducing the impurities and recovering the geological grade, lowering energy intake and bettering processing capacity. The products can also be utilised in quarrying to reclaim magnetite and hence increase source availability and to reclaim ferrous from slangs and rubbish, and thus protect the environment.

 

Characteristics: 

one. With handy set up, effortless to keep, dependable efficiency.
two. Continuous operate and straightforward operation, it can meet the user’s requirement for effective magnetic area and magnetic separation.
3. Optional magnetic drive: 150mT~500mT or more.
4. Very good accumulating result for the iron ore buried deeply in the content layer.

 

Specialized requirements: 

Model Roller diameter
 mm
Roller length mm  Conveyor belt width  mm Magnetic induction depth on the floor of roller  mT Feed dimension mm

Processing Capability

t/h

Excess weight

CTDG-fifty/50  five hundred 600 500 a hundred and sixty-350  ≤ 50  50-80  .four
CTDG-50/65  500 750 650 a hundred and sixty-350  ≤ 50  sixty-110  .5
CTDG-sixty three/65  630 750 650 one hundred sixty-400  ≤ 50  70-120  .7
CTDG-fifty/80  five hundred 950 800 a hundred and sixty-400  ≤ 50  70-150  .8
CTDG-sixty three/80  630 950 800 one hundred eighty-500  ≤ 150  a hundred-160  .nine
CTDG-eighty/80  800 950 800 180-500  ≤ 150  120-200  1.four
CTDG-63/100  630 1150 one thousand one hundred eighty-500  ≤ 150  one hundred thirty-180  one.5
CTDG-80/100  800 1150 a thousand a hundred and eighty-500  ≤ 150  one hundred fifty-260  one.nine
CTDG-a hundred/100  a hundred 1150 one thousand 180-500  ≤ 250  180-300  2.six
CTDG-sixty three/120  630 1400 1200 a hundred and eighty-500  ≤ 150  one hundred fifty-240  .2
CTDG-80/120  800 1400 1200 a hundred and eighty-500  ≤ 150  180-350  2.5
CTDG-one hundred/120  1000 1400 1200 a hundred and eighty-500  ≤ 250  two hundred-400  three.1
CTDG-a hundred and twenty/120  1200 1400 1200 180-500  ≤ 250  220-450  three.five
CTDG-eighty/140  800 1600 1400 a hundred and eighty-500  ≤ 250  240-400  three.7
CTDG-one hundred/140  one thousand 1600 1400 a hundred and eighty-500  ≤ 250  260-450  4
CTDG-one hundred twenty/140  1200 1600 1400 a hundred and eighty-500  ≤ 300  280-500  4.6
CTDG-one hundred forty/140  1400 1600 1400 one hundred eighty-500  ≤ 350  three hundred-550  five.5

 

Production Stream

Following Income Support

“Develop benefit for consumers wholeheartedly” has usually been HuaTe’s mission because its institution. With our top tier set up group and specialist following-sale support, we will always spot each merchandise good quality and our customers at our greatest precedence. Where there are our goods, there will be HuaTe’s service, and our brand name has left a deep effect on our customers all above the entire world.

Firm Profile

Huate, focusing on R & D, production and technical services of electric-magnetic separation products for 27 years, supplying clients with  packaged solutions. We are specializing in manufacturing superconducting magnetic separator, substantial gradient magnetic separator, drum magnetic separator, iron separator,  mining processing line, magnetic stirrer, non-ferrous steel separation gear, non-metallic processing equipment, CZPT & lake ecological equipment and so on more than 9 categories, 80 series and a lot more than 700 models. Our service scope requires coal, mine, electrical power, constructing materials, metallurgy, port, environmental safety and so on far more than ten fields. With far more than fifteen,000 consumers, our equipment are exported to the United states of america, Germany, Japan, Italy, Norway, South Africa, Brazil, India, Pakistan and many other nations around the world.

Laboratory Testwork

Huate offers scientific investigation, engineering design and style, manufacture of equipment and following product sales service for the customers. Our professional personnel can help you do the mineral beneficiation testwork for free with your sample ore, and help you style the greatest processing line to increase your profits, our specialist engineers are available abroad for products set up, commissioning and right after revenue assist, even operation education for your indigenous employees. We are committed to developing prolonged-time period consumer cooperation partnership.  

Certifications

HuaTe has gained the certification of CE, high quality, setting and occupational CZPT and safety management programs. We have a thorough quality handle system, present day screening machines, and expert supervision group in buy to guarantee the large top quality of our goods.

Trade Displays

Info for RFQ

1. Which sort of materials are you likely to deal with?

2. What is the particle dimensions of the raw components?

3. What is the processing capacity you are going to obtain?

4. Your requirements for final merchandise?

five. Your nearby power provide, voltage, phase, frequency, and many others.

US $5,000-50,000
/ Set
|
1 Set

(Min. Order)

###

Type: Magnetic Separator
Voltage: Customer Local Standard
Weight: 5T
Material: Casting Steel
Material Feature: Oil Resistant
Certification: ISO9001:2008, CE

###

Customization:

###

Model Roller diameter
 mm
Roller length mm  Conveyor belt width  mm Magnetic induction intensity on the surface of roller  mT Feed size mm

Processing Capacity

t/h

Weight

CTDG-50/50  500 600 500 160-350  ≤ 50  50-80  0.4
CTDG-50/65  500 750 650 160-350  ≤ 50  60-110  0.5
CTDG-63/65  630 750 650 160-400  ≤ 50  70-120  0.7
CTDG-50/80  500 950 800 160-400  ≤ 50  70-150  0.8
CTDG-63/80  630 950 800 180-500  ≤ 150  100-160  0.9
CTDG-80/80  800 950 800 180-500  ≤ 150  120-200  1.4
CTDG-63/100  630 1150 1000 180-500  ≤ 150  130-180  1.5
CTDG-80/100  800 1150 1000 180-500  ≤ 150  150-260  1.9
CTDG-100/100  100 1150 1000 180-500  ≤ 250  180-300  2.6
CTDG-63/120  630 1400 1200 180-500  ≤ 150  150-240  0.2
CTDG-80/120  800 1400 1200 180-500  ≤ 150  180-350  2.5
CTDG-100/120  1000 1400 1200 180-500  ≤ 250  200-400  3.1
CTDG-120/120  1200 1400 1200 180-500  ≤ 250  220-450  3.5
CTDG-80/140  800 1600 1400 180-500  ≤ 250  240-400  3.7
CTDG-100/140  1000 1600 1400 180-500  ≤ 250  260-450  4
CTDG-120/140  1200 1600 1400 180-500  ≤ 300  280-500  4.6
CTDG-140/140  1400 1600 1400 180-500  ≤ 350  300-550  5.5
US $5,000-50,000
/ Set
|
1 Set

(Min. Order)

###

Type: Magnetic Separator
Voltage: Customer Local Standard
Weight: 5T
Material: Casting Steel
Material Feature: Oil Resistant
Certification: ISO9001:2008, CE

###

Customization:

###

Model Roller diameter
 mm
Roller length mm  Conveyor belt width  mm Magnetic induction intensity on the surface of roller  mT Feed size mm

Processing Capacity

t/h

Weight

CTDG-50/50  500 600 500 160-350  ≤ 50  50-80  0.4
CTDG-50/65  500 750 650 160-350  ≤ 50  60-110  0.5
CTDG-63/65  630 750 650 160-400  ≤ 50  70-120  0.7
CTDG-50/80  500 950 800 160-400  ≤ 50  70-150  0.8
CTDG-63/80  630 950 800 180-500  ≤ 150  100-160  0.9
CTDG-80/80  800 950 800 180-500  ≤ 150  120-200  1.4
CTDG-63/100  630 1150 1000 180-500  ≤ 150  130-180  1.5
CTDG-80/100  800 1150 1000 180-500  ≤ 150  150-260  1.9
CTDG-100/100  100 1150 1000 180-500  ≤ 250  180-300  2.6
CTDG-63/120  630 1400 1200 180-500  ≤ 150  150-240  0.2
CTDG-80/120  800 1400 1200 180-500  ≤ 150  180-350  2.5
CTDG-100/120  1000 1400 1200 180-500  ≤ 250  200-400  3.1
CTDG-120/120  1200 1400 1200 180-500  ≤ 250  220-450  3.5
CTDG-80/140  800 1600 1400 180-500  ≤ 250  240-400  3.7
CTDG-100/140  1000 1600 1400 180-500  ≤ 250  260-450  4
CTDG-120/140  1200 1600 1400 180-500  ≤ 300  280-500  4.6
CTDG-140/140  1400 1600 1400 180-500  ≤ 350  300-550  5.5

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the two wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The two pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to one end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use two or more wheels to transmit force. Compound pulleys have two or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across four steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the two wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope four times reduces the force required to lift one foot. Likewise, if the pulley system had four pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is three times the length of the rope, it will be more than three times the required length.

China Magnetic Pulley Manufacturer     pulley block	China Magnetic Pulley Manufacturer     pulley block
editor by czh 2023-01-17

Tension pulley

As one of the tension pulley manufacturers, suppliers, and exporters of mechanical products, We offer cast pulleys and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of tension pulley.

Recent Posts